Canon LBP3360 - MODE TIMEOUT

6-26
Printing Environment Settings
6
SETUP Menu Settings
MODE TIMEOUT
OFF, 5 to 300 seconds; 15 seconds*
Specifies the function to finish a job automatically.
If you specify the time the printer times out in this item, the printer can finish a job
automatically when the specified time has elapsed since no data is entered.
If this item is specified, the printer can output paper automatically when data is
remaining in the printer because of an application not sending the command to
output paper.
When OFF is specified, the printer does not use the function to finish a job
automatically.
IMPORTANT
If the function to finish a job automatically is specified, the job may be finished in
the middle of the process when the computer takes a long time to process the data.
In this case, adjust the time the printer times out.
NOTE
• The (Job) indicator on the control panel is on or blinking during a job.
• When the printer is offline, the printer does not use the function to finish a job
automatically.