6-15
Printing Environment Settings
6
SETUP Menu Settings
STD PAPER SIZE
A4*, LTR, LGL, EXEC, ENV. ISO-C5, ENV. COM10, ENV. MONARCH, ENV. DL,
ENV. ISO-B5, INDEX CARD, STMT, 16K, A5, B5
Specifies a standard paper size for when the printer cannot determine the size of
the paper to process, such as when using paper that you cannot specify its size in
an application.
IMPORTANT
When printing from Windows or Macintosh, specify the paper size in the printer
driver. When you want to print from a computer in which an operating system such
as MS-DOS and UNIX is used and cannot specify the paper size, specify the size
in this item.
SLOT PRIORITY
OFF*, ON
Specifies whether the printer should detect the paper source in order starting with
the manual feed slot when AUTO is specified in the SELECT FEEDER menu.
If OFF is specified, the printer detects if the size of the paper in a paper source
matches the paper size of the received data in the following order.
Cassette 1 ➞ Cassette 2 *
1
➞ Manual Feed Slot
If ON is specified, the printer detects if the size of the paper in a paper source
matches the paper size of the received data in the following order starting with the
manual feed slot.
Manual Feed Slot ➞ Cassette 1 ➞ Cassette 2 *
1
*1: Only when the optional paper feeder is installed
IMPORTANT
When any paper is in the manual feed slot, you cannot feed paper from the paper
cassette. If you are printing from the paper cassette, remove any paper loaded in
the manual feed slot.
NOTE
•
If INVLDPAPER SLOT (See the next item) is set to ON, the setting for this item is
ignored, and the printer detects the paper source starting with the paper cassette.
When paper that is the same size as the paper size of the received data is not
loaded in the selected paper source, the printer feeds paper from the manual feed
slot.
•
Specify the setting for automatic paper selection in PAPER SOURCE (See p. 6-43)
in the SELECT FEEDER menu.
•
This item is effective only when PAPER SOURCE in the SELECT FEEDER menu
is set to AUTO.
To Next Page
Loading...
