4-10
Loading and Outputting Paper
Paper Requirements
4
Storing Printouts
When handling or storing printouts printed by this printer, be careful of the following
points:
IMPORTANT
•
Avoid storing printouts with PVC materials such as clear folders. Otherwise toner may
melt and stick to the PVC material.
•
Use insoluble adhesive when gluing printouts. Toner may melt when soluble adhesive is
used. Before using the adhesive, test it with paper that is no longer required.
Make sure that the printed paper is completely dry before placing one over another.
Toner may melt if they are placed together half-dried.
•
Store paper on a flat surface. Toner may peel when they are folded or creased.
•
Avoid storing printouts at high temperatures. Otherwise toner may melt and blot.
•
Put printouts in a binder when storing them for a long period of time (two years or longer).
(Printouts may discolor when they are stored for a long period of time.)
To Next Page
Loading...
