6-42
Printing Environment Settings
6
RESET Menu Settings
•
If you have output data, the data being printed is deleted. Print the data from the
computer again.
NOTE
•
The (Job) indicator is on when any print data remains in the printer memory or
when no print data remains in the printer but a job has not yet been completed.
•
If MODE TIMEOUT for a job is specified, data less than one page is also output
automatically when the specified time has elapsed (Data from PCL/UFR II Printer
Driver is not output.). MODE TIMEOUT for a job is set to 15 seconds in the default
settings.
•
If the (Job) indicator does not go off even after outputting the data, perform a
soft reset. (See the previous item)
To Next Page
Loading...
