7-21
Routine Maintenance
7
Cleaning the Fixing Roller
5
Load the cleaning page with the printed side facing down and
the arrow mark going into the manual feed slot first.
6
Press the (Online) key.
The paper is fed into the printer slowly, and the printer starts cleaning the fixing
roller.
NOTE
•
Cleaning takes approximately 90 seconds.
•
The cleaning process cannot be canceled. Please wait until it is completed.
•
When the front or back of the printed paper has smudge marks even after
performing the procedure above, perform the cleaning again. When doing so, do
not use the cleaning paper output in Step 4 above but load A4-size blank paper in
the manual feed slot, and then perform the cleaning.
CLEANING
01 CLEANING
To Next Page
Loading...
