Canon Oce PlotWave 550 - Set the Climate Control (Optional)

Set the climate control (optional)
Introduction
You have the option to install a climate control in the media drawer of your printer. The climate
control regulates the temperature for the media and optimises the print quality. You can enable
and disable the climate control in Océ Express WebTools.
NOTE
Default the climate control is enabled.
Procedure
1.
Open the [Preferences] - [System defaults] tab.
2.
Click on [Edit] in the [Printer properties] section or click on the [Climate control function] setting.
3.
Select [Enabled] or [Disabled].
4.
Click [Ok] to confirm, or [Cancel] to reject your entries.
Set the climate control (optional)
136
Chapter 3 - Define your Workflow with Océ Express WebTools