Use the belt unit
Introduction
When you install a belt unit, you increase capacity and flexibility. For standard media, up to 100
A0 prints can be delivered offset stacked on the belt unit.
NOTE
Under [Configuration] - [Printer setup] - belt capacity you can change the maximum of folded
packages that can be delivered on the belt unit.
Use the belt unit as fold delivery
Procedure
1.
Open Océ Express WebTools.
2.
Open the [Preferences] - [Fold] tab.
3.
Click on the edit icon to change an existing template, or click on the create new icon to create a
new template.
The template window opens.
4.
Set the [Fold delivery] setting to [Belts].
5.
Make any additional settings and save the template.
6.
Send a job to the printer, or submit one locally.
7.
On the user panel of the printer, select the fold template you created for the belt unit delivery.
Your output will be delivered on the belt unit.
Use the belt unit
224
Chapter 5 - Use the Folder
To Next Page
Loading...
