The delivery destination for print jobs
Introduction
The printer is equipped with a top delivery tray to collect your printed output.
The delivery destination
In Océ Express WebTools and under [Show all settings] on the user panel you can define the
delivery destination for your printed output.
• When you select [Top Delivery Tray] and you use plain or transparent paper, your printed
output is by default delivered face-down in the Top Delivery Tray. If you use a different media
type, the printed output is always delivered at the back of the printer.
The Top Delivery Tray can collect up to 100 prints. When the sensor detects that the delivery
tray is full, the printer will stop printing. The message [The Top Delivery Tray is full. Remove
the printed output.] appears on the user panel. Remove the paper to continue printing.
• If you select [Back output], your printed output is by default delivered at the back of the printer.
Your printed output is delivered face-up.
Media compatibility with the Top Delivery Tray and the back output
Paper media
Media name Compatible with the Top Delivery Tray
Paper 60 g Yes
[Bond 17 lb] Yes
[Bond 20 lb] Yes
[Bond 20 lb] Yes
[Recycled bond 20 lb] Yes
[Bond 24-28 lb] Yes
[Transp. 20 lb] Yes
[Transp. 24 lb] Yes
The delivery destination for print jobs
32
Chapter 2 - Get to Know the Printing System
To Next Page
Loading...
