How do I stop my Canton Smart Sounddeck 100 Speaker System from automatically playing from my mobile device?
If playback from a mobile device starts automatically when the Sounddeck is switched on, the automatic playback function AutoPlay [APL] is activated. Set AutoPlay [APL] to OFF to disable this function.
Why can't my Canton Smart Sounddeck 100 Sounddeck 100 connect to the network router?
If you can't establish a connection between the network router and the Sounddeck 100, the DHCP server might be deactivated in the router. Activate the DHCP server according to the router's instructions. Alternatively, a filter for MAC addresses might be enabled; deactivate the MAC Address Filter or add the address of the Sounddeck 100. Your router might also be incompatible with Chromecast built-in. Routers that are demonstrably compatible can be found in the web link in the chapter “Using Chromecast built-in for audio”. However, there are more compatible routers.
Why can't I select an input on my Canton Speaker System using the input buttons?
If an input cannot be selected via the Input buttons, it might be deactivated in the Input Config [INP] menu. Activate the input according to chapter Input Config [INP].
How do I increase the volume limit on my Canton Smart Sounddeck 100?
If the volume is limited to a value less than 70, a maximum volume less than 70 was likely selected in the Max Volume [VOL] menu. Increase the value according to chapter Max. Volume [VOL].
Why isn't my WiFi network showing up during setup of my Canton Smart Sounddeck 100?
General| Audio decoders | Dolby Atmos |
|---|---|
| RMS rated power | - W |
| Audio output channels | - channels |
| Audio Return Channel (ARC) | Yes |
| Wi-Fi | - |
| HDCP version | 2.2 |
| HDMI ports quantity | 4 |
| Connectivity technology | Wired |
| Product color | Black |
| Wall mountable | No |
| Audio formats supported | DTS |
Weight and Dimensions| Width | - mm |
|---|---|
| Soundbar weight | - g |
Warnings regarding electric shock hazards and unauthorized device opening.
Warnings about battery hazards, explosion risks, and potential life threats.
Lists all items included in the product box for verification.
Information on the initial operating phase for optimal sound development.
Instructions on activating and using the remote control.
Details of physical connectors and their on-screen display designations.
Explanation of the ARC function and its requirements for TV support.
Explains the meaning of different LED states for device status.
How to use the TV screen for settings and navigation.
Lists necessary prerequisites for using Chromecast functionality.
Step-by-step guide to install and configure Chromecast.
Instructions for integrating with Google Assistant via Google Home.
Notes on using voice control features with Google Home.
Lists prerequisites for Bluetooth audio streaming.
Step-by-step guide for pairing mobile devices via Bluetooth.
How to play audio via Bluetooth after pairing.
How to save input and sound settings to preset buttons.
How to save Spotify playlists to preset buttons.
Adjusting volume levels for individual speaker channels.
Setting the distance for optimal spatial sound effects.
Selecting equalizers to match room conditions.
Function to improve speech intelligibility in audio.
Setting the device to automatically shut down after a period.
Menu for infrared remote control functions and learning.
How to learn IR codes from other remotes for device control.
Assigning specific input selection to remote keys.
Assigning custom names to physical inputs.
Adjusting analog input playback level relative to digital sources.
Choosing between wireless (WIF) or wired (ETH) network connection.
Resetting all stored network settings on the Sounddeck.
Deleting all stored wireless settings and connections.
Configuring how the Sounddeck initiates Bluetooth pairing requests.
Automatic switching to BT input upon detecting audio signal.
Solutions for when the remote control does not function.
Troubleshooting steps for when no audio is produced.
Solutions for low volume issues.
Troubleshooting steps if the device fails to power on.
Solutions for when the device doesn't turn on by itself.
Troubleshooting steps for unexpected device shutdown.
Solutions for when the device fails to turn off automatically.
Solutions for humming or buzzing sounds from the device.
Solutions for unexpected switching to Bluetooth input.
Causes and solutions for the device turning on unintentionally.
Resolving problems with selecting the Bluetooth input manually.
Troubleshooting automatic switching to Bluetooth input.
Solutions for no playback or interrupted playback via Bluetooth.
Resolving problems with the automatic playback function.
Solutions if pairing wireless speakers or subwoofers fails.
Correcting issues with wireless speakers playing the same channel.
Solutions for Sounddeck not changing inputs automatically.
Solutions for the Sounddeck unintentionally changing its input source.
Solutions if paired wireless speakers do not power on with the Sounddeck.
Activating inputs that cannot be selected via buttons.
Increasing volume when it's limited to a value less than 70.
Solutions for when a slave speaker shows [WLS] in the display.
Troubleshooting if the subwoofer does not reproduce sound.
Solutions for establishing a connection between router and Sounddeck.
Solutions if the WiFi network is not visible during setup.
Solutions if the Sounddeck is not found in the mobile app.
Details on operating voltage, frequency, and power consumption.
Supported audio formats and virtualizer technology.
Physical specifications and Bluetooth details.
Input signal levels and operating temperature range.
Guidelines for the proper and intended use of the Sounddeck.
Information on CE mark and environmentally friendly disposal.
To Next Page
