CanyCom CMX222 - Page 50

-41-
Maintenance 5
Item Description
Schedule
Note
PSI
Mon
Year
Drive Train
HST
HST shall perform normally..
√ √ √
Hydraulic uid shall be lled to a proper
level and shall be clean and free of dirt or
contamination.
√ √
Page 59
Lever or pedal shall not be loose or have
excessive play.
√ √
V-belt
Belt tension shall be properly adjusted.
√ √
Page 61
Belt shall be free of damage or excessive wear.
√ √
Page 61
Brake
Brake shall work properly.
√ √ √
Page 62
Parking Brake
Parking brake shall be able to hold the machine
on a 25-degree *
1
or 15-degree *
2
slope.
√ √
Steering
Wheel
Turn steering wheel right and left; front wheels
shall turn accordingly.
√ √
Rods, Links,
and Wires
Rods, links, and wires in linkage shall be free of
deformation or damage.
√ √
Connections shall be free of looseness,
excessive play, or missing cotter pins.
√ √
Body, Chassis, Safety Devices
Chassis,
Frame
Shall be free of cracks, deformation, or
corrosion.
√ √
Fastening bolts or nuts shall not be loose or
missing.
√ √ √
Body Panels
Shall be free of cracks, deformation, or
corrosion.
√ √
Doors and lids shall open, close, and lock
properly.
√ √
Fastening bolts or nuts shall not be loose or
missing.
√ √ √
Labels
Warning labels and instruction plates shall be
clean, legible, and free of damage.
√ √ √
Cutting System
Cutting
System
Blades shall be free of cracks or damage.
√ √ √
Page 63
Blade mounting bolts shall be free of cracks or
damage.
√ √ √
Page 63
Cutting blade shield shall be free of cracks or
damage.
√ √ √
Skirt on cutting blade shield shall be free of
cracks or damage, and shall not be missing.
√ √ √
*
1
CMX222
*
2
CM223