After Normal Use
1. Clean machine; wash off dirt, mud, and remove grass and other foreign materials after
use.
2. If machine is to be left outside, cover machine with protective, water-proof covering after
it is cooled off.
8. Turn throttle lever to [ (slow)] to slow
engine speed.
9. Stop engine
10. Stop water and remove hose.
11. Install cap back in place.
12. Move cutting rotary clutch lever to [Transport]
• Do not wash engine or control panel with running water; water may enter inside
and cause rust or damage.
• Fire hazard; clean machine of cut grass and similar material after use. Cut grass
that is accumulated on the machine can catch re.
To Next Page
Loading...
