• Licence or certication is required to operate a crane. Check your local
regulations.
• Use hoisting sling of sufcient strength. Always use the slings of the same
length when more than one is used.
• Pay special attention to the center of gravitiy and the balance of machine when
hoisting.
3. Shift auxiliary transmission shift lever to [Low], set cutting height adjuster lever to
[Transport], and drive machine slowly forward onto loading deck.
4. Park machine according to the instructions in "Parking" (Page 29). Tie machine with
rope or tie-down belts and secure it onto loading deck of transporter securely.
To Next Page
Loading...
