Transmission Oil
1. Park machine on a level ground.
2. Have an appropriate oil drain pan.
3. Open engine hood.
4. Remove transmission oil ller cap.
• Oil to Use: Page 43.
• Oil Capacity: Page 43.
NOTE
5. Remove transmission oil drain plug to drain
oil.
6. Install drain plug back in place.
7. Fill specied amount of correct oil into ller.
8. Put ller cap back in place.
9. Close engine hood.
Front Differential Oil (CMX222 Only)
1. Park machine on a level ground.
2. Have an appropriate oil drain pan.
3. Remove front differential oil drain plug to
drain oil.
4. Install drain plug back in place.
5. Remove front differential oil ller plug.
6. Fill specied amount of correct oil into ller.
7. Install ller plug back in place.
To Next Page
Loading...
