CanyCom CMX222 - Removing and Installing Body Panels; Front Cover

Maintenance
-48-
5
1. Unfasten knob nut.
Front Cover
Removing and Installing Body Panels
• Cut or pinch hazard exists when removing or installing body panels; beware of
sharp edges and pinch points.
• Make certain to reinstall panels after removing for repairs or inspection.
5321M-0505-010E
Knob Nut
2. Pull sides of cover wide as shown, then pull
up cover to remove.
5321M-0505-020E
Front Cover
Pull sides
• Always stop engine and remove ignition key before servicing.