• Perform a pre-startup inspection (PSI) before each use, a monthly inspection once a
month, and a yearly inspection once a year.
• Some maintenance procedures described below may require special knowledge
or tools and instruments. Contact your CANYCOM representative to perform such
procedures.
Chassis
Item Description
Schedule
Note
PSI
Mon
Year
Drive Train
Tires
Tires shall be inated to the specied
pressure.
√ √ √
Page 56
Tires and wheels shall be free of crack,
damage, or uneven wear.
√ √
Wheel bolts shall not be loose or missing.
√ √ √
Wheel bearings do not exhibit excessive play
and no irregular noise or overheating shall
be observed.
√ √
Transmission
Irregular noise or overheating shall not be
observed when moving forward or backward.
√ √
There shall not be oil leaks in or around
transmission.
√ √
Auxiliary
Transmission
Transmission can be shifted to either position
positively and performs normally.
√ √
Lever shall not be loose or have excessive
play.
√ √
Front Diff. *
1
Front Knuckle
*
1
*
2
Irregular noise or overheating shall not be
observed when traveling.
√ √
There shall not be oil leaks in or around front
differential case or knuckles.
√ √
Center
Gearbox*
1
Transmission can be shifted to either 2WD
or AWD position positively and performs
normally.
√ √
Irregular noise or overheating shall not be
observed when traveling.
√ √
There shall not be oil leaks in or around
center gearbox.
√ √
*
1
CMX222
*
2
CM223
To Next Page
Loading...
