-83-
Transporting
7
• Park transporter (truck) on a level ground. Always use chocks to secure
wheels.
• Do not allow bystandars to come close to machine or transporter when loading
or unloading machine.
• Use only loading ramps with sufcient strength (to withstand the combined
weight of machine and operator), width (more than twice the width of tire.), and
length (more than 4 times the height of loading deck of transporter), and have
anti-slip ramp surfaces.
• Secure the hooks of loading ramps rmly and ush with loading deck.
• Move slowly forward when loading onto, and move slowly backward when
unloading off of transporter. Pay special care when going over the joint between
loading deck and ramps; machine may tip.
• Do not turn on loading ramps. Machine may fall.
• Tie down machine securely. Make sure machine does not move around.
Hauling
Loading and Unloading
1. Park the transporter on a level ground. Secure wheels with chocks.
2. Place loading ramps. Secure hooks of ramps rmly and ush with loading deck.
To Next Page
Loading...
