Engine
Engine Oil
• Always stop engine and remove ignition key before servicing.
• An engine that has been running is very hot. Allow engine to cool before
servicing, or severe burns may result.
• Keep re and spark away when servicing.
1. Park machine on a level surface.
2. Open engine hood.
3. Pull out dipstick and wipe it clean.
4. Insert dipstick fully and pull it out.
• Make certain to ll engine with correct grade of oil to the specied level.
Insufcient amount or wrong grade of oil reduces performance and may cause
permanent damage to engine.
• Dispose of the drained oil properly.
Inspecting
• To obtain correct reading, check oil level before starting, or wait about 10 minutes
after stopping engine to allow oil to drain back to oil pan.
• Always check oil level on a level surface.
• Oil to Use: Page 43.
• Oil Capacity: Page 43.
NOTE
To Next Page
Loading...
