CanyCom CMX222 - Page 82

-73-
Maintenance 5
3. Remove rubber boot.
1. Remove upper rear cover.
2. Remove 2 screws to remove lens.
Lens
5321M-0510-060E
Tail Lamp
Light Bulb
5321M-0510-070E
3. Replace with a new light bulb.
4. Install lens back in place.
5. Install upper rear cover back in place.
5323M-0510-090E
Socket
4. Remove socket.
5. Replace with a new light bulb.
6. Put rubber boot back in place.
7. Install light unit back in place.
8. Install front cover back in place.
5323M-0510-080E
Rubber Boot