Installation and Programming Guide 103
Example
For example, you could create a 24/7 schedule and then have this schedule follow an
action. Next assign a keypad permission this schedule. Now based on what the action does,
we can conditionally enable or disable a keypad. This provides a high level of flexibility and
multiple sets of rules using actions can be set up like this.
Programming Instructions for Arm-Disarm
Goal
Automatically arm and disarm your Aritech Reliance XR system.
Pre-conditions
Areas have been programmed.
Notes
After Arm-Disarm is programmed, a user must arm the system to initiate the function.
The Arm-Disarm will function as if it is the user you select. You will need to program valid
user permissions including Area Groups, User Schedule, Profile levels, and active date and
time.
Creating a new user only for the purpose of Arm-Disarm will make it easier to maintain.
Use defaults for Schedules, Area Groups and Permissions for faster programming.
Aritech Reliance XR will sound a warning prior to the Arm-Disarm from arming an Area. This
is set in Areas – Area Timers – Area Type Delay.
If a user with Area Type Override option disarms an Area with Arm-Disarm, then the Arm-
Disarm will no longer function on that Area. To re-enable Arm-Disarm that Area must be
manually armed.
Programming Sequence
To Next Page
Loading...
