Carrier Aritech Reliance XR Series - Advanced Keyfob Programming

54 Installation and Programming Guide
6. Trigger the keyfob learning function for 2 seconds (on 63-bit keyfobs hold down the arm
and disarm buttons, on 80plus keyfobs hold down the Arm + 2 buttons). The screen will
show the keyfob has been found and the Serial Number will appear.
7. The keyfob will have access to Area 1 and the panel will report the keyfob number to
the Central Monitoring Station when it is used.
8. Click Save.
Advanced Keyfob Programming
Three levels of access are possible:
1. Area 1 only – this is the default behaviour after learning a keyfob. The User is set to
“Use FOB Number as Standard User”.
2. All areas – Click the drop-down User menu to assign the keyfob a User number. The
keyfob will inherit areas and permissions of that user. New users, the default Master
user, and the default Standard user have access to ALL areas. The user number is
reported to the Central Monitoring Station when the keyfob is used.
3. Custom permissions – Keyfobs can be restricted to selected areas.
Simple Method: navigate to the User menu and select a suitable Area Group. The arm
and disarm buttons on the keyfob will arm/disarm all areas in the Area Group.
Advanced Method:
a. Create a new User.
b. Change the User Type to Custom.
c. Assign an unused Permission to the User.
d. Create one or more Area Groups. Each one has a set of selected areas.
e. Modify the Permission and assign the appropriate Area Group to the Control
Groups displayed. For example, the Permission can Away Arm both Area 1 and 2
but Disarm only Area 1.
f. Return to the Settings – Keyfob menu.
g. Select the User that has been created.
The keyfob is now linked to the custom user, and the custom permissions will be
applied. When the arm button is pressed, all areas in the Away Arm Control Group
will be away armed. When the disarm button is pressed, all areas in the Disarm
Control Group will be disarmed.
Keyfob Options:
• Tick the Police option to allow Panic Alarms to be sent to the Central Monitoring Station
when Arm + Disarm Buttons are pressed at the same time. In addition, the panel will
display the status and sound audible alerts. Please consult with your Central Monitoring
Station what action will be taken.