72 Installation and Programming Guide
copied to a USBUP and then inserted into a Aritech Reliance XR system to program it
without a computer.
Download Menu
This menu allows you to:
• Initiate a connection to the panel.
• Disconnect from a panel.
• Read all programming, including all connected expansion devices and backup copies
where available.
• Send all programming to the panel.
• Read the event log.
• Initiate a callback session before download, where this feature is enabled on the
panel.
• Write programming to a NX-586 / NX-588. This allows on-site programming of
selected panels without the need for a computer.
• Read programming from a NX-586 / NX-588. This allows retrieval of panel
programming from selected panels on-site without the need for a computer.
• Enable auto-answer for callback.
Reading Data
All programming located inside a customer panel can be retrieved and stored in the DLX900
database for further editing or backup purposes.
Reading All Data
To retrieve the contents of all control panel menus and store it in DLX900:
1. Select the customer you want to connect to.
To Next Page
Loading...
