44 Installation and Programming Guide
Method 4: NXX-1820- Keypad
The NXX-1820- is able to access all panel programming features with a valid installer code.
1. Press Menu – [Installer PIN] – [ENTER] – Program.
2. Scroll through the menus using the up and down buttons. Refer to Appendix 3:
Advanced Menu Tree on page 137.
3. Press an item to go down a level or to select an option. Press the back arrow to go up a
level or to cancel without saving.
4. Repeatedly press the back arrow to return to the main menu.
Note on legacy devices: NetworX keypads (including NX-1820) have limited access to
Aritech Reliance XR programming. Aritech Reliance XR keypads (NXX-1820 and 7” Touch
Screen) can program legacy NetworX devices via the Advanced – Devices menu.
To Next Page
Loading...
