112 Installation and Programming Guide
2. Under sub-menu 12 - IP Options, tick the box “Enable UltraSync”.
3. Go to Menu 22 - UltraSync.
4. Enter a new 8-digit Web Access Passcode. All zeros will disable UltraSync remote access.
5. Enter the required details into your device/software. This includes the Aritech Reliance
XR serial number, Web Access Passcode, and a valid Username and PIN code. The
Aritech Reliance XR serial number can be found in the Device Info menu.
6. Verify the UltraSync service is working by using your device/software to connect your
Aritech Reliance XR system.
Troubleshooting
• Check the Web Access Passcode is correct. It cannot be 00000000.
• Check there is a valid user, and they have a First name, this will be the login name.
• Check the serial number is correct. It is printed on the Aritech Reliance XR module.
• Check that the user permissions are currently valid.
• See Troubleshooting Section in the Appendix for more information.
Programming Instructions for Event Lists
Goal
Create segmented lists of events so Channels can selectively deliver event messages.
Pre-conditions
None.
To Next Page
Loading...
