Carrier Aritech Reliance XR Series - Programming Instructions for Communicator; Configure each communication path

Installation and Programming Guide 107
Example
An office with 3 Areas wants to automatically be disarmed during office hours, and armed
out of office hours.
We create Schedule 4 Mon-Fri 9am-5pm. Then User 55 with permission to arm and disarm
Area 1, 2, and 3 at any time or day.
Then each weekday at 9am the system will disarm Areas 1, 2, and 3 as if it were user 55 and
report those disarm events (openings) to the communication channels specified.
At 5pm each weekday the system would arm Areas 1, 2, and 3 as if it were user 55 and
report those arm events (closings) to the communication channels specified.
Programming Instructions for Communicator
Goal
Configure each communication path for delivering event messages.
Pre-conditions
None.
Arm-Disarm Number 1 - Arm-Disarm Example
Schedule 4 – Office Hours
Mon – Fri
9 AM – 5 PM
User 55 – Arm-Disarm User
Permission 99 – Full Access
Schedule 1 – Full Access
7 days, 24 hours
Arm Area Group 1
1, 2, 3
Disarm Area Group 1
1, 2, 3
See Schedule to
program
See Permissions to
program
See Users to
program
See Schedule to
program