Installation and Programming Guide 113
Notes
If an event message is enabled in an Event List, then the Channel will attempt to deliver it. If
an event message is not enabled on the Event List, the Channel will not attempt delivery
even if the message has been sent to it.
Event List set up for push notifications is automatically performed by the UltraSync+ app
when required. The panel will assign the next available channel and matching event list
number. No configuration via the web pages or DLX900 is required.
Programming Sequence
Instructions
1. Open Event Lists.
2. Enter a name for the list.
3. Check the events you want to include in the list.
To Next Page
Loading...
