Installation and Programming Guide 55
• Tick “No Siren on Police” for Silent Panic, when activated the Aritech Reliance XR will
have no indication the panic has been triggered, the Silent Panic event will be sent to
the Central Monitoring Station. Please consult with your Central Monitoring Station
what action will be taken.
• Tick Auxiliary to allow the keyfob to send an Auxiliary Alarm. On the 63-bit keyfob this is
performed when the LIGHT and STAR buttons are pressed at the same time, on the
80plus keyfob this is performed when 1 and 2 buttons are pressed. Please consult with
your Central Monitoring Station what action will be taken.
• Select a pre-programmed Scene from the drop-down menu. When the Scene button is
pressed on that specific keyfob, the Aritech Reliance XR will “run” this scene. On the 63-
bit keyfob this is the LIGHT button, on the 80plus keyfob this is the 2 button.
Note: When programming the Scene under the Settings – Scenes menu, the “Scene
Trigger” is optional, simply select up to 16 actions to be performed when the scene is
“run” by the keyfob.
To Next Page
Loading...
