Carrier Aritech Reliance XR Series - Page 119

Installation and Programming Guide 119
• Channels and Channel Groups must be programmed (see "Programming Instructions for
Channels" on page 114).
Notes
Each zone may be allocated to multiple Areas through an Area Group.
Events will be sent to the lowest numbered Area in the Area Group.
A zone may have a Second Zone Profile, when this becomes active all events will be sent to
the Area Group programmed in the second profile.
Programming Sequence
Instructions
1. Open the lowest Area number for the Zone.
3. Zones
4. Areas
- Entry-Exit Times
- Area Options
- Area Timers
- Area Reporting
7. Schedule
18. Channel Groups
12. Area Groups