Carrier Aritech Reliance XR Series - Page 122

122 Installation and Programming Guide
Take note of the Sequence Attempts under Communicator – System Event
Reporting (6.11.2). This is the number of times Aritech Reliance XR will attempt the
sequence of Channels you set up in this section.
Programming Sequence
Instructions
1. Go to Communicator, System Event Reporting.
2. Select a Channel Group.
3. Done. The Aritech Reliance XR will now report system events to the Channels selected
in the Channel Group you just selected.
5. Channels
18. Channel Groups
6. Communicator
17. Event Lists
17. Event Lists
18. Channel Groups
6. Communicator
- General Options
- IP Configuration
- Cellular Configuration
- Username
- Password
- APN
- Remote Access
- System Event Reporting