Installation and Programming Guide 139
Viewing Cameras on Touchscreen
If 7” WiFi Secondary Touchscreens are installed, check:
• Panel arming/disarming is possible. This confirms if the touchscreen is enrolled
correctly with the panel and that the WiFi network is working.
• Cameras are accessible from the UltraSync+ app, the video preview and live stream
should work. This confirms the camera is set up correctly, has access to the internet,
and can be authenticated by the panel. For local only panels (no internet and no
app), this step can be skipped.
• All cameras have a secure password.
• All touchscreens have the same password entered into the MENU – Touchscreen –
Camera Username / Password.
• Reboot the WiFi router.
To Previous Page
Loading...
