34 Installation and Programming Guide
Connect to Aritech Reliance XR via UltraSync+ app
UltraSync+ is an app that allows you to control your Aritech Reliance XR system from an
Apple® iPhone/iPad, or Google Android device. First set up the Aritech Reliance XR Web
Server then download this app. Carrier charges may apply and an Apple iTunes or Google
account is required.
1. On your smartphone go to the Apple® App Store
TM
or Google Play
TM
store.
2. Search for UltraSync.
3. Install the app.
4. Click the icon on your device to launch it.
5. Click + on the top right to add a new site, or the (i) icon to edit an existing site.
6. Enter the details of your security system.
• Locate the 12-digit serial number barcode on the Aritech Reliance XR circuit board.
Alternatively log in to Aritech Reliance XR Web Server and go to Settings – Details to
view it.
• The default Web Access Passcode of 00000000 disables remote access. To change it,
log in to Aritech Reliance XR Web Server and go to Settings - Network.
• The default username and PIN code is "installer" 9713 (for an installer) and “User 1”
1234 (for a user). Please note that there is a space between "User" and "1".
Username is case-sensitive. You may also use any other valid user account. Only
menus a user has access to will be displayed.
7. Click Done button to save the details, then Sites to go back.
8. Click the name of the Site, the app will now connect you to Aritech Reliance XR.
Using the App
The first screen that will appear once you connect is the Overview screen. This will display
the status of your system and allows you to arm or disarm areas by touching Arm Away,
Arm Stay, or Disarm. It also allows you to activate programmed automation scenes.
To Next Page
Loading...
