Carrier Aritech Reliance XR Series - Page 95

Installation and Programming Guide 95
3. Select the options you want, the SIA/CID event code can be customized. See the Aritech
Reliance XR Reference Guide for a table of codes.
4. Go to Zones.
5. Select a zone number you want to program.
6. Enter a name for the zone.
7. Select the zone type profile you just created.
8. Select the zone options profile you just created.
9. Select an Area Group for the zone. If you want a zone to be in its own Area then select
an Area Group with only one Area. To create a zone in a common Area, select an Area
Group with multiple Areas. Alternatively come back to this step later.
10. For a standard installation set the schedule to a preset which is 24 hours every day,
holidays should NOT be ticked. For example, “Always On”. This will enable the first zone
profile.
If you want the zone settings to change based on a schedule, then select the first
schedule here.
If no schedule is set in either the first or second zone profile then the zone will be
disabled.
11. If you are setting up a keyswitch zone, then the user number field controls which user
profile will be used to arm/disarm. The keyswitch zone will report as default User 99.
12. If you are programming a second zone profile, then go to that now and repeat steps 4-
7.