Carrier SPS - Appendix: I-Vu System Wiring Specifications and Recommended Vendors

Appendix: i-Vu System Wiring Specifications and Recommended Vendors
Carrier Sensors 53
Wiring specifications
Recommended vendors & part numbers
Wire type
Description
Connect Air
International
(Available
thru ALPS)
Belden
Ramcorp
Contractors
Wire & Cable
MS/TP network
(RS-485)
22 AWG, single twisted shielded
pair, low capacitance, CL2P, TC
foam FEP, plenum rated. See
MS/TP Installation Guide for
specifications.
W221P-22227 -- 25160PV CLP0520LC
MS/TP network
(RS-485)
24 AWG, single twisted shielded
pair, low capacitance, CL2P, TC
foam FEP, plenum rated. See
MS/TP Installation Guide for
specifications.
W241P-2000F 82841 25120-OR --
Rnet 4 conductor, unshielded, CMP,
18 AWG, plenum rated.
W184C-2099BLB 6302UE 21450 CLP0442
Power -
24 Vac
2 conductor, CM, 18 AWG,
unshielded.
W181P-2051 5300UE 21251 CLP0440
Analog & discrete
sensor wiring
< 100 ft
Single twisted pair, unshielded,
CM, 22AWG, plenum rated.
W221P-2005 6500UE 21281 CLP0410
Analog & discrete
sensor wiring
100–500 ft
Single twisted shielded pair, CM,
22AWG, plenum rated.
W221P-2044 6500FE 21280 CLP0520
Appendix: i-Vu System Wiring Specifications and Recommended Vendors