CASE CONSTRUCTION 1107EX - Operator protective structure

7-MAINTENANCE
TorquespecicationsforROPScab
CheckthetorqueofthemountingboltsfortheROPS
canopyandtheROPScabduringtherun-inperiodof
anewmachine,aswellasatthe500hmaintenance
interval.
1.Checkforcracks,rust,orholesintheROPSandROPS
components.Age,weather,andaccidentscancause
damagetotheROPSandROPSparts.Ifyouhaveany
doubtabouttheintegrityoftheROPSsystem,seeyour
CASECONSTRUCTIONDealer.
WARNING
Tip-overhazard!
Addingadditionalweight(buckets,attach-
ments,etc.)tothemachinecancreateatipping
hazard.Donotexceedthegrossweightindi-
catedbythemachinespecications.
Failuretocomplycouldresultindeathorseri-
ousinjury.
W0153A
RCPH10WHL130BAL3
Operatorprotectivestructure
2.CheckthetorqueoftheROPSmountingbolts.Ifnec-
essary,tightentheboltstothecorrecttorque.
PTIL16TLB0389AB4
Torquespecications
ROPScabmountingbolts(bothsides)
Torqueto:773–854N·m(570.1–629.9lbft).
Seatmountingbolts
Torqueto:73–87N·m(53.8–64.2lbft).
NOTE:Torquespecicationsareforclean,drythreads.
7-26