Case IH 9250 - Updating Insight Software with USB Drive

18
Overview
Updating Insight
®
Software with USB Drive
Updating software may cause the Foresight option to be disabled. If you have purchased
Foresight, contact Headsight before updating software.
1. You will need:
• USB drive
• Means of loading USB Stick (computer with USB)
2. Load USB drive with new software les.
• Place insightf.hex in the root directory of USB drive (ex. E:\insightf.hex)
• Do not change le names
3. If you do not have the new les you may:
• Download updated software from www.headsight.com
• Order pre-loaded USB drive from Headsight, Inc.
4. Remove cap from USB on front of Insight controller.
5. Insert USB drive card into USB slot on front of Insight.
6. Power Insight.
• Turn on key switch
7. Wait for software to download.
•
Yellow light will blink while download is in progress
•
Green light will turn on solid when download is complete
8. Verify update is successful.
• Go to >>About Insight>>Software Version and read software version number
9. Remove USB drive.
10. Install cap on USB on front of Insight controller.
11. Remove power from Insight.
• Turn off key