Case IH VISION PRO - Page 13

13
* Function is limited by system conditions, see system notes for this function.
REF NAME FUNCTION
1
Autoguidance Engages autoguidance if the system is calibrated, and set up for the eld conditions.
2
Congurable Function #5
May be assigned to different functions using the display. By default, pressing this
button will prompt the congurable button menu screen in the display. If there is
already something assigned to this button it can be changed in the vehicle settings
screen by clicking on the armrest wizard on the right side of the screen.
3
Congurable Function #6
4
Congurable Function #7
5
Congurable Function #8
6
Gear / Speed Target Up
Power Drive: Pushing this button up and releasing will shift the transmission up on
gear. Pushing the button up and holding it will continue to shift the transmission up
until it is released.
CVXDrive
™
: Pushing this button up will move the speed target to the next highest
preset target (F1, F2, F3 / R1, R2, R3).
7
Gear / Speed Target Down
Power Drive: Pushing the button down will down shift the transmission one gear.
Pushing the button down and holding it will continue to shift the transmission down
until released.
CVXDrive: Pushing the button down will move the target speed down to the next
slowest speed (F1, F2, F3 / R1, R2, R3).
8
Shuttle Shift Forward Commands the shuttle shift from reverse to forward.
9
Shuttle Shift Reverse Commands the shuttle shift from forward to reverse.
10
Step Switch or Headland
Management Control
Press this button to trigger the Headland Management Control function. “Record” and
“Play” must be commanded through the display. The button can be used to turn on
Autoguidance or can be used to toggle between Constant Engine Speed 1 and 2.
If a congurable button is not set to a function, pressing the button will prompt the conguration screen in the display.