Need help?Do you have a question about the Case IH VISION PRO and is the answer not in the manual?
General| Brand | Case IH |
|---|---|
| Model | VISION PRO |
| Category | Farm Equipment |
| Language | English |
Explains various icons used in the AFS Pro 1200 display for guidance features and operations.
Explains the meaning and function of various icons displayed on the AFS Pro 1200 screen.
Provides step-by-step instructions for setting up and engaging autoguidance.
Describes the seven preset Run Screens displaying different operational information.
Details the content of each of the seven Run Screens on the AFS Pro 1200 display.
Provides an overview and labeling of the buttons on the multifunction handle.
Details the functions and numbering of the electro-hydraulic remote levers.
Explains the controls and functions of the throttle panel for Power Drive tractors.
Details the functions of the throttle controls specific to the CVXDrive transmission.
Explains CVXDrive™ automatic/manual modes and the anti-jack knife feature.
Identifies and explains the controls on the main armrest panel for standard and optional front hitch.
Details the functions of the Operations Screen/Navigation Encoder Knob and the system dial.
Explains how to use the transmission control icon for APM adjustments and gear selection.
Explains how difflock and MFD engagement zones are relative to hitch position.
Details the functions of the buttons found in the armrest compartment, including EHR valve selection and hitch adjustments.
Describes the capabilities of the optional joystick for loader applications and other tractor functions.
Provides a practical guide to the AFS Pro 1200 display, detailing icons, screens, and functions.
Explains how the Application Icon accesses individual applications like Remote Assistance, Gallery, Radio, and Phone.
Details how to change column names and customize Run Screens for displaying related information.
Explains how to control cab climate via the AFS Pro 1200 display and panel, including automatic modes.
Guides the user through the process of calibrating the tractor's transmission.
Details entering and verifying tractor/implement measurements for accurate guidance calibration.
Explains how to configure tractor and armrest controls for personalized operation and remote preference.
Guides the user on setting and configuring tractor rear remotes and lever assignments.
Explains how to set PTO engagement limits based on 3-point hitch positions.
Provides steps for attaching and setting up a three-point mounted implement, including ballast and tire pressure.
Explains the functions of the three-point hitch and draft control for load and depth control.
Details hitch control value settings, screen operations, and lower limit adjustments.
Details the Hitch Position Control and Draft Control sections on the AFS Pro 1200 display.
Explains how to set the rear hitch lower set point using the knob on the armrest pad.
Details hitch operation, lower limit setting, and connecting hydraulic hoses for trailing implements.
Explains setting up auto guidance lines and managing Headland Management Control sequences.
Details the TPMS, its function, and how tire pressure values are displayed and color-coded.
Introduces system wizards for date/time, camera, display, units, language, and inputs.
Explains diagnostics, service intervals, calibration, and monitoring items on run screens.
Details storage areas, USB ports, cup holders, and the optional refrigerator in the cab.
Explains RAM mounting, USB ports, and power connections for monitors and accessories in the cab.
Details USB ports, armrest levers, foot throttle, Harley bars for comfort, and the foot-activated engine brake.
To Next Page