Case IH VISION PRO - AFS Pro 1200 Display: Climate Control; Climate Control Setup

CASE IH PRO VISION OPERATING SYSTEM GUIDE
38
AFS Pro 1200
™
Display
CLIMATE CONTROL SETUP
All AFS Connect
®
Magnum
™
tractors are equipped with a
climate control panel, located in the overhead headliner,
and the look varies with the cab option selected.
The cab climate control can also be controlled via the
AFS Pro 1200 display. Simply push the HVAC screen
shortcut on the armrest or use the operations screen
navigation encoder knob.
The operator selects the desired cab temperature within the
available range 61-88° F (16-31° C) with the cab controls
or the display screen. Thereafter, temperature is always
controlled by the ATC system. Adjusting temperature below
61° F (16° C) puts the system in MAXIMUM COOL operating
mode. Adjusting the temperature above 89° F (31° C) puts
the system in MAXIMUM HEAT operating mode.
The current operating mode is shown on the display
screen and partially with the LED lamps on the overhead
HVAC controls.
Automatic Modes
In full automatic mode, the system uses air ow, the
heater control valve and the air-conditioning compressor to
maintain the desired cab temperature. Temperature control,
blower speed and air distribution are automatic.
On the display screen, the mode button indicates
auto and the A/C button is on. The auto icons are
green for fan speed and air distribution.
Any adjustment of fan speed or air distribution
puts the system in partial auto mode, where the
system maintains the desired cab temperature with
the operator’s selections. The auto icons for fan speed
or air distribution are black when control is manual.
HVAC screen shortcut Operations screen navigation encoder knob
Adjusting the temperature above 89 °F (31 °C) puts the
system in MAXIMUM HEAT operating mode. Fan speed is
set to 100%, and air is distributed only through the oor
and under-the-seat vents. The heater control valve is
fully open in all operating modes when the temperature
set point reads
MAX HEAT.
Adjusting temperature below 61 °F (16 °C) puts the
system in MAXIMUM COOL operating mode. Fan speed is
set to 100%, and air is distributed only through the front,
lateral and under-the-seat vents. The heater control valve
is fully closed in all operating modes when the temperature
set point reads
MAX COOL.