EasyManua.ls Logo

Case IH VISION PRO - A-Post Instrumentation Cluster - Power Drive Tractors

Case IH VISION PRO
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
A-Post Instrumentation Cluster – Power Drive Tractors
1 The left turn signal arrow
2 The brake warning light
3 Tractor’s MFD is engaged – Illuminates when the MFD is engaged, the
automatic MFD engages, or when both brake pedals are applied
4 Front Diff-lock is engaged – Illuminates when the Diff-lock is turned on
by the operator, the Auto Diff-lock is turned on and the tractor is going
in a straight line (N/A on Magnum)
5 The right turn signal arrow
6 The STOP warning light – Illuminates when there is a fault that
requires immediate attention
7 Low engine oil pressure
8 Not applicable in North America
9 Trailer brakes are active – If equipped, this light will come on when the
trailer brakes are active
10 Front axle suspension is locked out – This light will come on when the
front suspension system is turned off by the operator, or the tractor is
in Park
11 Rear axle Diff-lock is engaged – Illuminates when the Diff-lock is
turned on by the operator, the Auto Diff-lock is turned on and the
tractor is going in a straight line.
12 Not Available in North America
13 Fuel level
14 DEF level
15 Coolant temperature
16 Air pressure, if present – If not, then engine oil pressure
(Engine oil pressure shown)
17 Tractor Direction – Indicates tractor direction of travel (forward shown)
18 Anti-Jack Knife Feature is shown when activated (see page 16)
19 Forward Target Speed
20 Reverse Target Speed
21 Front Hitch position in percent
22 Front PTO RPM
23 Front PTO engaged
24 Rear PTO engaged
25 Rear PTO speed
26 Rear Hitch position in percent
27 Engine RPM
28 Constant Engine Speed
29 In this location one of the following icons will appear:
Engine Power Boost, Engine Compression Brake, or Engine Grid Heater
30 Ground Speed
31 Low temperature warning – for hydraulic oil
32 Yellow Warning Light – Warns operator that a fault exists that needs to
be serviced
33 Park break applied light. Comes on when the tractor is
placed in “Park”
34 Not applicable in North America
35 Not applicable in North America
36 Guidance On – Guidance system has control of the tractor’s
steering system
37 Red Battery – Alternator not charging the battery
38 Road Lights On – Road lights are on
39 Bright Lights On – High beam road light are on
40 Work Lights On – Work lights are on
41 Guidance Inactive – Guidance is on but not engaged
42 Hydraulic Valve Activated – Illuminates as long there is ow from at
least one remote in either direction
43 Not applicable in North America
The A-Post Instrumentation Cluster is basically a single
location where the tractor functions are displayed in
one location. With a combination of numbers, graphs,
and icon lights the operator gets a quick look at what
is going on with the tractor.
1
6 7
13 14 15
16
17
19
18
21
24
22
25
20
27
30
32
38 39 40 41 42 43
33 34 35 36 37
31
28 29
23
26
8 9 10 11 12
2 3 4 5

Related product manuals