Case IH VISION PRO - AFS Pro 1200 Display: Tractor Remotes; Tractor Remotes Setup

45
AFS Pro 1200
™
Display
TRACTOR REMOTES
Find this screen in the Vehicle Settings, and the Tractor sub
menu.Once there, scroll through the selections on the right
side of the screen until the Remotes choice appears.If you
want to set the rear remotes then touch the + to the left of
the tractor, and the information about the remote will appear
based on the number of rear remotes on the tractor.As the
tractor goes down the production line, the information will be
populated with the number of remotes on the tractor.
If the operator wants to see the location of the remote lever at
all times, simply add the function from the conguration area
(UDW) to the left side of the screen or to the center of the
screen. To add it to the screen hold the run screen until this
pop window appears and select YES.
Now select UDW – tractor and the function to be added—
in this example, levers was added.
The levers can be added to the center of the screen, placed
to the left side, both sides, or individually to the screen.
There is one more way to congure the remotes by selecting
EHR from the UDW menu and add. Always be sure to save
your transaction when completed.