110
ADVANCED SETTINGS
Perform the following steps to change the focus mode.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Focus” and then
press [X].
3. Use [S] and [T] to
select the focus mode
setting you want and
then press [SET].
An icon appears on the
monitor screen to indicate the
current focus mode.
• See the following pages of
this section for details
about shooting with each
focus mode.
NOT
• You can also use the Panel (Operation Panel) (page 53) to
change the focus mode setting.
Focus Mode Icon
To Next Page
Loading...
