67
SHOOTING A SNAPSHOT
Changing the Image Size
A digital camera image is a collection of small dots (pixels).
The size of an image indicates how many pixels it contains, and
is expressed as horizontal pixels × vertical pixels. The initial
factory default image size setting is 10M (3648 × 2736 pixels).
Note that a larger image takes up more memory.
• For information about image size, image quality, and number
of images that can be stored, see page 260.
This setting applies to snapshots only.
• For information about movie image size, see page 89.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Size” and then
press [X].
3. Use [S] and [T] to select an image size and
then press [SET].
NOT
• You can also use the Panel (Operation Panel) (page 53) to
change the image size setting.
• The following information changes on the display during
the image size selection operation.
– Image size in megabytes (M) (5M, etc.)
– Image size in pixels (2560 × 1920, etc.)
– Optimum print paper size
Image Size (Pixels) Print Paper Size
Larger
Smaller
10M 3648 × 2736 Poster Print
3:2 3648 × 2432 Poster Print
16:9 3648 × 2048 HDTV
5M 2560 × 1920 A3 Print
3M 2048 × 1536 A4 Print
2M 1600 × 1200 3.5" × 5" Print
VGA 640 × 480 E-Mail
To Next Page
Loading...
