192
OTHER SETTINGS
3. Use [S] and [T] to select the setting you want
and then press [SET].
You configure the camera so it does not turn on when you press
the [ ] (REC) or [ ] (PLAY) button, or to turn off when you
press the [ ] (REC) or [ ] (PLAY) button.
1. Press [MENU].
2. On the “Set Up” tab, select “REC/PLAY” and
then press [X].
When you want to connect to this type
of device:
Select this
setting:
Computer or a printer that supports USB
DIRECT-PRINT (page 197)
With this setting, the computer sees the
camera as an external storage device.
Use this setting for normal transfer of
images from the camera to a computer
(using the bundled Photo Loader
application).
Mass Storage
(USB DIRECT-
PRINT)
Printer that supports PictBridge (page
197)
This setting simplifies the transfer of
image data to the connected device.
PTP
(PictBridge)
[ ] (REC) and [ ] (PLAY) Button
Settings
[] []
To Next Page
Loading...
