191
OTHER SETTINGS
You can use the following procedure to select one of 10
languages for on-screen messages.
1. Press [MENU].
2. On the “Set Up” tab, select “Language” and
then press [X].
3. Use [S], [T], [W], and [X] to select the setting
you want and then press [SET].
You can use the procedure below to change the USB
communication protocol that is used when exchanging data with
a computer, printer, or other external device. Select the protocol
that suits the device to which you are connecting.
1. Press [MENU].
2. On the “Set Up” tab, select “USB” and then
press [X].
Changing the Display Language Changing the USB Port Protocol
To Next Page
Loading...
Need help?
General
