70
SHOOTING A SNAPSHOT
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “AF Assist Light”
and then press [X].
3. Use [S] and [T] to select “Off” and then press
[SET].
When you want to turn on the AF assist lamp, select “On”
here.
IMPORTANT!
• Do not look directly into the AF assist/self-timer lamp or
point it directly at a person’s eyes.
Snapshot Shooting Precautions
■ Operation
• Never open the battery cover or place the camera on the USB
cradle while the operation lamp is flashing green. Doing so
can result in incorrect storage of the image you just shot,
damage to other images stored in memory, malfunction of the
camera, etc.
• Shooting a dark subject while “Auto” is selected for the ISO
sensitivity (page 123) setting will cause the camera to
increase sensitivity and increase shutter speed automatically.
Such conditions can cause digital noise in the image.
• If unneeded light is shining directly onto the lens, shade the
lens with your hand when shooting an image.
To Next Page
Loading...
