171
USING AUDIO
Voice Recording lets you record audio only, without a snapshot
or movie.
Using built-in memory only, you get up to about 24 minutes of
Voice Recording.
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select “Voice
Recording” and then press [SET].
This causes “ ” to appear on the monitor screen.
3. Press the shutter
button to start
recording.
• The operation lamp
flashes green while
recording is in progress.
• You can press [DISP]
during recording to turn off
the monitor screen.
• Pressing [SET] during
recording will insert a
marker into the recording.
During later playback, you
will be able to jump to the
markers in the recording.
Recording Audio Only (Voice
Recording)
Recording Time
Remaining Recording Tim
To Next Page
Loading...
