126
ADVANCED SETTINGS
The camera’s filter feature lets you add color tints to your images
as you shoot them. The color effect look just like what you would
get by installing a color filter on the lens of the camera.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Filter” and then
press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Available filter settings are: Off, B/W, Sepia, Red, Green,
Blue, Yellow, Pink, and Purple
Use the following procedure to adjust the sharpness of subject
outlines in your images.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Sharpness” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
You can specify one of five sharpness settings from +2
(sharpest) to –2 (least sharp).
Using the Camera’s Filter Effects Controlling Image Sharpness
To Next Page
Loading...
