231
USING THE CAMERA WITH A COMPUTER
■ Removing the Camera from the USB Cradle
1. On your Macintosh screen, drag the camera
drive to Trash.
2. Press the USB cradle [USB] button. After
making sure that the cradle’s USB lamp is not
lit, remove the camera from the cradle.
Managing Images on Your Macintosh
If you are running Mac OS X, you can manage snapshots using
iPhoto, which comes bundled with your operating system.
If you are running Mac OS 9, install the Photo Loader application
from the CD-ROM that comes with the camera.
■ Installing Photo Loader
Before starting installation, be sure to read any “readme” file that
accompanies Photo Loader. “readme” files contain important
information about installation, including installation conditions
and computer system requirements.
1. Place the CD-ROM that comes bundled with
the camera into your Macintosh CD-ROM
drive.
Use the CD-ROM that has “Photo Loader” on its label.
2. Open the folder named “Photo Loader”.
3. Open the folder named “English” and then
open the folder named “Important”.
To Next Page
Loading...
Need help?
General
