156
EDITING IMAGES
4. Use [W] and [X] to
select the candidate
you want to correct.
5. Use [S] and [T] to select “Correct” and then
press [SET].
• Select “Cancel” to exit the procedure without performing
keystone correction.
IMPORTANT!
• If the original image is smaller than 2M (1600 × 1200
pixels) size, the new (corrected) version will be the same
size as the original one.
• Keystone correction cannot be performed on the following
types of images.
– Movie images
– Images created with MOTION PRINT
– Images recorded with another camera
• The keystone correction operation cannot be performed if
there is not enough memory to store the corrected image.
• When you display a corrected image on the camera’s
monitor screen, the date and time indicate when the image
was originally recorded, not when the image was corrected.
• When a keystone corrected image appears on the full-
month calendar screen, it is displayed on the date that it
was corrected (page 151).
To Next Page
Loading...
Need help?
General
