138
PLAYBACK
■ To cut everything between two specific
frames
1.
While the movie is
playing, press [SET].
• This will pause movie
playback.
2.
Press [왔].
• You can also display the same screen while in the
PLAY mode, by pressing [MENU], selecting the
“PLAY” tab, selecting “Movie Editing”, and then
pressing [왘].
3.
Use [왖] and [왔] to select “ Cut”, and
then press [SET].
• Select “Cancel” to exit the cut mode.
5.
When the frame you
want is displayed,
press [왔].
6.
Use [왖] and [왔] to select “Yes,” and then
press [SET].
• The message “Busy.... Please wait...” will remain on
the display as the cut operation is performed. Cutting
is complete when the message disappears.
• Select “No” to exit the cut mode.
To Next Page
Loading...
