VIEWING IMAGES ON A COMPUTER
202
5.
Turn off the camera, and connect the USB
cable that comes bundled with the camera to
the camera’s [USB/AV] port and your
computer’s USB port.
6.
Turn on the camera.
• Your Macintosh will see the camera’s file memory as
a drive.
• The appearance of the drive icon depends on the
Mac OS version you are using.
• Your Macintosh will see the camera’s file memory as
a drive whenever you establish a USB connection
between the camera and your Macintosh.
7.
Double-click the drive icon for the camera’s
file memory, the “DCIM” folder, and then the
folder that contains the image you want.
• Take care when connecting the USB cable to the
camera or your computer. USB ports and cable plugs
are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
USB port
Connector (A)
USB cable (bundled)
[USB/AV]
To Next Page
Loading...
Need help?
General
